Breathe …is there anything more important?

4Aug/112

Glaze Firing Test Results

I unloaded my first glaze firing of the summer early this morning. My main objective this time was to do a bunch of glaze testing. This might have been a bit too ambitious. I tested 6 clay bodies, 4 base glazes and numerous coloring agents. I spent a whole day mixing samples. I weighed the dry ingredients of the four base glazes then sieved them dry; then I measured out 30 grams of each adding a percentage of a coloring agent. The copper carbonate was disappointing. I forgot how strong the cobalt and chromium are and those samples came out too dark. The reds, oranges and yellows came from using Degussa Inclusion Pigments. I think that they were successful. I used chartreuse Mason Stain for the light lime green. (I was hoping for something closer to my toenail polish.) Two of the glaze bases, which by the way, I came from Mastering Cone Six Glazes, were supposed to be semi-mat. The glaze cycle went a bit faster than I had anticipated so I didn't turn off the fan on the venting system at the very end of the cycle. I think the kiln cooled a bit faster than recommended to get a good mat finish.

I also made some plates because we need them. I used a dark brown clay, decorated them with white slip, bisqued, then added cobalt oxide accents. I couldn't decide what color to glaze them so I splashed 3 colors on top letting the design show through. They came out okay and will be fun to eat off of but I know better than to cling to plates in our house. They get broken easily.

30Jun/110

Blogging from “the Bray” Recap

Pictured below - pots and sculptures. Everyone who comes as a resident  leaves work here, on the walls and scattered here and there. I felt like many of these piles of pots were kind of like the objects left at Mt Kailash attached with prayers. I went around examining the lidded jars and since I didn't bring a pot to leave, sometimes, I put my card inside. I wonder if anyone will find any them?

Pots out there

And.....

Before my experience at Archie Bray fades into a distant memory I would like to write down a few things. Much of this information is for my clay friends who didn't go.

Saturday there were talks and discussions. Topics at the talks that I attended:

  • ceramics and the future, a discussion about online social networking and computer generated 3d modeling and printing.
  • ceramics and real world issues.

Some the phrases that I wrote down are as follows. Take this as a random assortment of words and thoughts. I haven't explained them. Perhaps when I have more time I'll add more information to this list:

  • ALSIO
  • good for one tender moment - Ayumi Horie - pottery combined with Online Social Networking
  • haptic information
  • Gartner Hype Cycle
  • C & C
  • Rhino
  • farting on marble
  • social commentary
  • creative spirit needs exercise
  • Kaneko - open space for your mind

Friday night there was the auction. Auctions are so much fun. The wine was flowing freely and so too the money. The Peter Voulkos piece sold for $125,000. Nice to see a reallocation of wealth from the rich to the arts.

Saturday there were a couple demos. I watched Julia Galloway and Sara Jaeger.

Aside from the beautiful detailed work that Sara does, I was interested in the way she props up her passive foot with 2 fire bricks.

Sara Jaeger

Julia who is a very animated effusive gal, pulled some very cool handles with bits of clay imbedded, inside them that she called her "green pea" handles, she made a cactus handle and she also showed how to use wood shellac as a resist in applying slip. I asked about writing an artist statement but later found Julia has the best intro to her work which I have lifted from her site. Sorry I just couldn't help myself. This is just too good.

I make pottery.
I am committed to the daily act of making beautiful objects
and insistent about creating with my hands.
A need for beautiful domestic objects and an instinctual
drive to create things, are tremendous dance partners
for idea and desire.

Julia Galloway

Saturday afternoon we visited Helena area studios and Saturday night there was a party.

All in all, a good time was had. More pictures from Archie Bray are on my Flickr site.

Now I'm going to play with clay and let this guy hold up the fort or the gallery in this case.Holding up the fort

23Jun/110

Blogging from “the Bray” 2

Busy day with lots of demos.

Beth Cavener Stichter creating sculptures expressing the human spirit dressed in animal bodies. If you go to Beth's website, where she details her work procedures,  you will see how hard this woman works. She is a great example of the axiom 10% inspiration and 90% perspiration. To hollow out a piece it takes 3-5 weeks. Typically she hollows a piece to 1/4 inch thickness; so she essentially makes the sculpture twice - once from the outside and again on the inside and I haven't even mentioned making the armature, cutting it apart, putting it together, etc., etc.

Beth Cavener Stichter

Beth wears stripped socks. I asked her about this and she said she does this when she gives a presentation so she doesn't take herself too seriously.

Tip Toland analyzing the idiosyncrasies of the face.

Tip Toland

Below Robert Brady demonstrating slap centering. What a great way to focus aggressive energy.

Robert Brady

The following are phrases from my notes:

  • Things being in control and out of control.
  • Spastic mental process.
  • Form = intuitive
  • Surface = experience through the eyes
  • Mastery is not a result of repetition but a result of awareness.
  • Nichrome wire
  • Elmer's glue with alumina to line touching edges of lids so they don't fuse.
  • Process is circular.
  • Notice what you notice.
  • Curves and straight lines recharge each other.
  • Loose pots and pots with gesture and intentionality.
  • Unconscious incompetence-conscious incompetence-conscious competence-unconscious competence.
  • From Sandy Simon, TRAX Ceramics Gallery, "Eighty percent of sales come from the internet store."

I bought 300 lbs of glaze making materials from the Archie Bray Clay store. Just out of curiosity, I asked them if they kept MSDS data sheets on hand. They said that they treated all powdered substances as being hazardous and used a respirator while handling everything but if I wanted a good source for MSDS sheets to go online to Laguna Clay Company.

Still my favorite thing to do here; wandering around discovering gems tucked here and there in all the alleys and corners. This place is a bit like a maze with surprises at every turn.

Pavement Mandala

22Jun/111

Blogging from “the Bray”

The Archie Bray Foundation for the Ceramic Arts is a public, nonprofit, educational institution founded in 1951 by brickmaker Archie Bray, who intended it to be "a place to make available for all who are seriously and sincerely interested in any of the branches of the ceramic arts, a fine place to work." Its primary mission is to provide an environment that stimulates creative work in ceramics.

from Archie Bray.org

Starting tomorrow is the 60th birthday celebration. I arrived this afternoon, wandered around,  met many friendly people and took a few pictures. This is an amazing place. There are sculptures, beautiful ceramics everywhere. The energy in the air is electric. There are people from all over the world.

I met a very nice inspiring woman named Gwen Heeney from Wales. She makes sculptures with bricks that she has fabricated. This installation has two parts: one recessed into the earth which is the female and one that is erect and reaching up to the sky which is the male. She said that the shadow of the male part fits perfectly across the slot in the female part.

Gwen's Girl

Gwen's Boy

I also took a picture of Gwen. She was dressed in working clothes with a hat and scarf to protect her from the sun. I thought she looked so interesting and exotic while she seemed a bit mifted about having her picture taken.  I loved her spirit and I think it shows in this picture. And to do her justice, I also included a picture below of her without her head garb.

Gwen Heeney

Gwen

Other pictures below.

Another male/female installation

Another male/female installation

Lots-a-bricks

Lots-a-brick

Naner naner naner

;-0

6Jun/110

Developing an Idea or How Kiss Me Quick Was Born

We had this assignment to make a non-representational sculpture. I decided to somehow portray a spiral. I started building the piece with coils. I was intrigued with how my spiral started developing. and while working, the piece seemed to take on an existence of it's own. This was a transcendent experience. I felt I was the conduit for some creative force outside myself. I have no idea where the tentacles and the lips came from. The result is pictured below before firing.

My teacher suggested I make another sculpture like this one only bigger. I am not a risk taker when it comes to firing and was afraid a big piece wouldn't survive without cracking. I made the second one in sections resembling collapsed vent hoses. This approach had it's advantages and disadvantages. I started in the Fall of 2009. The first group came out of the kiln with only about half  usable and my sections where not angled enough to make a tight curve. I made more sections and added canted wedges to increase the bend.

I finally had enough pieces to assemble by the end of March 2010, a week before the deadline to submit for the student art show at North Idaho College. I started assembling the sculpture in the garage with construction adhesive. I had no idea exactly how the pieces were going to fit together. It became evident that I was dealing with much more weight than I had anticipated and I felt I was doing battle with gravity. I had to change my first concept to accommodate gravity and I'd originally only planned on using one set of lips.

It was cold that week but finally I was gluing the last two sections together... And then...the whole thing collapsed!! It was too cold for the glue to cure properly. Gravity won this round!  I missed the deadline for the show and ended up finishing in the summer with warm weather. It was worth the wait. I eventually entered this sculpture in the NIC student art show a year later and won an honorable mention. Pictured below: "Kiss Me Quick"

This semester we had an assignment to make a sculptural teapot. When it came to making the spout it only seemed natural that it would have lips. Pictured below - "Gimme Big Kiss."

Part of developing an idea depends the limitations of materials and gravity; the other part depends on where you let your mind take you...

10Apr/110

Round

Wheels, coins, frisbees, manhole covers, DVD's, and buttons, are round.

Balls, BB's, planets, bubbles, and marbles are spherical.

Why are these such special shapes? And why are these things round or spherical?

Why are bubbles spherical? A sphere most efficiently balances the air pressure between the two sides of the soap film. Planets are spherical because the gravitational force compresses matter into a shape that is evenly distributed.

And, why are manhole covers round? There are many answers to this question but the one I like the most is that a round cover is the only shape that will not fall through a round hole. Every other shape could drop into it's diagonal. (Images of manhole cover rubbings here: Christiansen Designs.)

Other facts about circles:

  • Cylindrical containers can hold more volume than square or hexagonal containers made with the same amount of material.
  • Round plates hold more food.
  • A round pizza uses less dough to fill the largest space.
  • A round table gives diners more space for more dishes, as well as, a sense of equality.

So, LET'S ALL HEAR IT FOR ROUND!

Also round - the mandala pictured below from eternalglimpse.com

Buddho Telescope

Source for part of this information: A Beginner's Guide to Constructing the Universe, Michael Schneider

24Jan/111

Design

I'm interested in what makes good design and process involved in making good design. I posted the video below so I could find it easily.

Tagged as: 1 Comment